PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 6 minutes
PLEASUE USE TYPE"A" BULB MAX 60-WATT OR CFL BULB MAX 13-WATT OR LED MAX 9-WATT
THERE IS 1 X 9W LED BULB IN THE BOX.
.
1
3
I
C
A
D
C
A
A
B
D
F
H
G
C
I
A
C
A
B
D
F
H
G
C
I
A
C
Step 1 Step 2 Step 3
Make sure all parts could be aligned before assemble Unscrew the Socket Ring(C) and Screw (E)from Place the Feather Shade(A) onto the socket
A
B
D
F
H
G
C
I
A
C
Do not rotate lamp body too hard avoid base screw broken the Socket Assembly(D). and by turning the Socket Ring(C) clockwise.
Press the Holder(B) and insert it into the interior of the Screw the Tube(G) to the Circle base(H),then fix it Insert the bulb(I) into the socket.
Feather Shade(A). screw the Tube (F) to the Tube (G).
Screw the Socket Assembly (D) to the Tube(F) Put the light on a level surface to check if
by tightening the Screw(E) everything is stable.
A
B
D
F
H
G
C
I
A
C
ENJOY YOUR LAMP
A
B
D
F
H
G
C
I
A
C
To Previous Page
Loading...
Need help?
General
