JONATHAN Y Porto JYL7450A User Manual

WARNING
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.
WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT
BREAKER BEFORE INSTALLATION.
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
Model#: JYL7450A
Product Dimensions: 8.875''WX10"DX14"H
To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to
wipe the surface of the fixture.
To clean the inside of the fixture, first disconnect power to the fixture by turning off the circuit breaker or by
removing the fuse at the fuse box. Next, use a dry or slighly damperned clean clorth (use clean water, never a
solvent) to wipe the interior surface of the fixture.
Do not use any cleaners with chemical, solvents or harsh abrasives. Use only a dry soft cloth to dust or wipe
carefully.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for
safe use and installation
*The external flexible cable or cord of this lamp cannot be replaced
If the cord is damaged, the lamp shall be destroyed
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A
Mounting
Bracket
1X H Cap Nut 4X
B
Mounting
Screw
2X I Glass 1X
C Ground Screw 1X J Frame 1X
D Support Screw 2X K Fixed Glass Fixture 2X
E Wire Connector 3X L Studs 2X
F Base 1X M Top Hood 1X
G Washer 4X
1/2

JONATHAN Y Porto JYL7450A Specifications

General

Brand	JONATHAN Y
Model	Porto JYL7450A
Category	Outdoor Light
Material	Metal
Bulb Type	LED
Voltage	120V
Wattage	9W
Lumens	800
Color Temperature	3000K
Style	Modern
Number of Lights	1
Shade Material	Glass
Power Source	Hardwired
Base Type	E26
IP Rating	IP65
Fixture Features	Dimmable

Summary

General Warnings

Installation Recommendation

Recommends installation by a licensed electrician for the lighting fixture.

Electrical Safety

Emphasizes switching off the main electrical supply before installation.

Damage Inspection

Instructs to inspect the item for damage before installation and not to install if damaged.

Care and Maintenance

Cleaning Instructions

Provides instructions for cleaning the fixture using a damp cloth and avoiding solvents or abrasives.

Important Safety Instructions

Pre-Assembly Check

Ensures all parts are present before beginning assembly.

Assembly Surface

Recommends assembly on a soft surface to protect the finish.

Risk Reduction

Advises following guidelines to reduce risk of fire, shock, or injury during use and installation.

Cable Replacement

States the external cable cannot be replaced; a damaged lamp should be destroyed.

Preparation and Assembly Steps

Parts Verification

Instructs to verify all parts against lists and not to assemble if any are missing or damaged.

Wiring Connections

Provides a chart for making correct wire connections between the fixture and the power supply.

Grounding Instructions

Details how to properly connect the ground wire according to installation location (US or Canada).

Assembly Procedure

Outlines the sequential steps for assembling the lighting fixture components.