5
Charging base Instruction
Charging pin
Drying air outlet
Drying air inlet
Charging socket
Self-cleaning + air drying function
Put the machine on the air drying base, and ensure that the machine is in the charging state; press the self-cleaning
button to start the self-cleaning function; air will be blown out continuously from the air drying base to properly
dry the robber brush after self-cleaning. Please timely clean the wastewater tank after cleaning, and remove any
residual stains on the base if any.
Tips: ED10 has no air drying function, but ED11 has air drying function.
To Next Page
Loading...
