Jonsered 2055 - EC Declaration of Conformity; Compliance and Certification Information

English – 35
TECHNICAL DATA
EC-declaration of conformity (Applies to Europe only)
Jonsered, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declares under sole responsibility that the chain saws
Jonsered 2054 Turbo and 2055 Turbo/2055W Turbo from 2002's serial numbers and onwards (the year is clearly stated
in plain text on the type plate with subsequent serial number), are in conformity with the requirements of the COUNCIL'S
DIRECTIVES:
- of June 22, 1998 ”relating to machinery” 98/37/EC, annex IIA.
- of May 3, 1989 ”relating to electromagnetic compatibility” 89/336/EEC, and applicable supplements.
- of May 8, 2000 ”relating to the noise emissions in the environment” 2000/14/EC.
For information relating to noise emissions, see the chapter Technical data.
The following standards have been applied: EN292-2, CISPR 12:1997, EN608.
Notified body: 0363 Deutsche Prüfstelle fur Land- und Forsttechnik, Weissensteinstr 70/72, DE-34131 Kassel, Germany,
has carried out EC type examination in accordance with the machinery directive's (98/37/EC) article 8, point 2c.
The certificates for EC type examination in accordance with annex VI, have the numbers: K-EG 212 – 2054 Turbo,
K-EG 201 – 2055 Turbo/2055W Turbo.
In addition, SMP, Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has certified conformity
with annex V of the Council's Directive of May 8, 2000 ”relating to the noise emissions in the environment” 2000/14/EC.
The certificates have the numbers: 01/161/025 – 2054 Turbo, 01/161/026 – 2055 Turbo/2055W Turbo.
The supplied chain saw conforms to the example that underwent EC type examination.
Huskvarna January 3, 2002
Bo Andréasson, Development manager