Jonsered 2055 - Technical Data; Engine and Noise Specifications; Bar and Chain Specifications

34 – English
Engine
Cylinder volume, cm
3
Cylinder bore, mm
Stroke, mm
Idle speed, rpm
Recommended max. speed,
unloaded, rpm
Power, kW
Ignition system
Manufacture
Type of ignition system
Spark plug
Electrode gap, mm
Fuel and lubrication system
Manufacturer
Carburettor type
Fuel capacity, litre
Oil pump capacity at 8500 rpm,
ml/min
Oil capacity, litre
Type of oil pump
Weight
Without bar and chain, kg
2054
53,2
46
32
2 500
13 000
2,6/9 300
Electrolux
ET
Champion
RCJ 7Y
0,5
Walbro
HDA 119
0,56
4,25–8,5
0,38
Automatic
5,2
2055
53,2
46
32
2 500
14 800
2,8/9 600
CAT 2,7/9 600
Electrolux
ET
Champion
RCJ 7Y
0,5
Walbro
HDA 119
0,56
4,25–8,5
0,38
Automatic
5,2 / CAT 5,5
Noise emissions
(see note 1)
Sound power level, measured
dB(A)
Sound power level, guaranteed
L
WA
dB(A)
Sound levels
(see note 2)
Equivalent sound pressure level
at operator’s ear, measured
according to relevant internatio-
nal standards, dB(A)
Vibration levels
(see note 3)
Front handle m/s
2
Rear handle m/s
2
Chain/bar
Standard bar length,
inches/cm
Recommended bar lengths,
inches/cm
Usable cutting length
inches/cm
Chain speed at max.
power, m/sec
Pitch, inches
Thickness of drive link, mm
Number of teeth on drive
sprocket
TECHNICAL DATA
2055
111
112
101 / CAT 102
3,3
6,2
15"/38
13"/33–18"/48
12"/30–17"/43
18,5/7t
0,325"
1,3
7
2054
110
112
100
3,3
8,6
15"/38
13"/33–18"/48
12"/30–17"/43
18,0/7t
0,325"
1,3
7
Bar and chain combinations
The following combinations are CE approved.
Bar Chain
Length, Pitch, Max.
inches inches tip radius
13 0,325 10T Jonsered S25
15 0,325 10T Jonsered S25
16 0,325 10T Jonsered S25
18 0,325 10T Jonsered S25
13 0,325 10T Jonsered S30
15 0,325 10T Jonsered S30
16 0,325 10T Jonsered S30
18 0,325 10T Jonsered S30
15 3/8 10T Jonsered S42
16 3/8 10T Jonsered S42
18 3/8 10T Jonsered S42
L
1
5
Type Inch Inch/mm Inch/mm Degree Degree Degree Inch/mm Inch/mm: dl
S25 0,325" 0,058"/1,5 3/16"/4,8 85° 30° 10° 0,025"/0,65 13"/33:56 15/38:64
16/41:66 18/46:72
S30 0,325" 0,050"/1,3 3/16"/4,8 85° 30° 10° 0,025"/0,65 13"/33:56 15/38:64
16/41:66 18/46:72
S42 3/8" 0,058"/1,5 7/32"/5,5 60° 25° 0° 0,025"/0,65 15"/38:56 16/41:60
18/46:68
Note 1: Noise emissions in the environment measured as sound
power (L
WA
) in conformity with EC directive 2000/14/EC.
Note 2: Equivalent sound pressure level, according to ISO
7182, is calculated as the time-weighted energy total for sound
pressure levels under various working conditions with the
following time distribution: 1/3 idling, 1/3 max. load, 1/3 max.
speed.
Note 3: Equivalent vibration level, according to ISO 7505, is
calculated as the time-weighted energy total for vibration levels
under various working conditions with the following time
distribution: 1/3 idling, 1/3 max. load, 1/3 max. speed.
´*xs6¶68¨