Jonsered CS 2240 II - English; Table of Contents; Contents

CONTENTS
8 – English
1155356-93 Rev.2 2014-04-15
Contents
KEY TO SYMBOLS
Symbols on the machine: ...................................... 7
Symbols in the operator’s manual: ........................ 7
CONTENTS
Contents ............................................................... 8
INTRODUCTION
Dear Customer, ..................................................... 9
WHAT IS WHAT?
What is what on the chain saw? ........................... 9
GENERAL SAFETY PRECAUTIONS
Before using a new chain saw .............................. 10
Important .............................................................. 10
Always use common sense .................................. 11
Personal protective equipment ............................. 11
Machine ′ s safety equipment ................................. 11
Cutting equipment ................................................. 13
ASSEMBLY
Fitting the bar and chain ....................................... 17
FUEL HANDLING
Fuel ....................................................................... 18
Fueling .................................................................. 19
Fuel safety ............................................................ 19
STARTING AND STOPPING
Starting and stopping ............................................ 20
WORKING TECHNIQUES
Before use: ............................................................ 21
General working instructions ................................ 21
How to avoid kickback ........................................... 24
MAINTENANCE
General ................................................................. 25
Carburettor adjustment ......................................... 25
Checking, maintaining and servicing chain saw
safety equipment .................................................. 25
Muffler ................................................................... 26
Starter ................................................................... 26
Air filter .................................................................. 27
Spark plug ............................................................. 27
Needle bearing lubrication .................................... 27
Cooling system ..................................................... 27
”Turbo Air Cleaning” centrifugal cleaning .............. 28
Winter use ............................................................. 28
Maintenance schedule .......................................... 29
TECHNICAL DATA
Technical data ....................................................... 30
Guide bar and saw chain combinations ................ 31
Saw chain filing and file gauges ........................... 31
EC Declaration of Conformity ............................... 31