Need help?Do you have a question about the Jonsered CS 2250S and is the answer not in the manual?
Explains symbols shown on the chainsaw itself.
Explains symbols used within the manual for instructions.
Welcomes the customer and provides initial context about the product.
Identifies and labels all parts of the chain saw using a diagram.
Outlines initial checks and preparations required before operating the chainsaw for the first time.
Provides crucial warnings and advice regarding safe operation and maintenance.
Emphasizes exercising caution and seeking expert advice when uncertain about procedures.
Details the essential safety gear required for operating the chainsaw to minimize injury risks.
Explains the function of built-in safety features and the importance of their maintenance.
Describes the function and importance of the chain brake and front hand guard for accident prevention.
Explains the function of the throttle lockout in preventing accidental acceleration.
Describes the purpose of the chain catcher to prevent injuries from chain malfunctions.
Details the function of the right hand guard for hand protection and branch deflection.
Explains how the vibration damping system reduces operator fatigue and potential health issues.
Describes the muffler's role in noise reduction and exhaust direction, including fire safety warnings.
Guides on selecting and maintaining cutting equipment for safety and performance.
Details features that help minimize kickback risks.
Explains bar characteristics and their impact on kickback.
Describes chain types and warns about kickback dangers.
Provides instructions on how to sharpen the chain and set the depth gauge for safety.
Offers guidance on adjusting the depth gauge for optimal cutting and kickback reduction.
Explains the procedure and importance of maintaining proper chain tension.
Details the process and importance of lubricating the chain and bar for safety and longevity.
Explains how to properly fill the chain oil tank and the importance of correct oil type.
Describes how to verify that the chain lubrication system is functioning correctly.
Discusses the chain drive sprocket and its wear and replacement.
Details the process of lubricating the needle bearing in the clutch drum.
Provides guidance on inspecting the chain and bar for wear and damage.
Details how to check the bar for wear and damage.
Step-by-step instructions for correctly mounting the bar and chain onto the chainsaw.
Instructions for fitting a spike bumper, advising to contact a service agent.
Discusses fuel types, octane ratings, and environmental considerations for the chainsaw.
Provides instructions and ratios for mixing petrol and two-stroke oil correctly.
Explains the type of chain oil to use and potential issues with incorrect oil.
Details the safe procedure for refuelling the chainsaw, emphasizing fire prevention.
Lists essential safety precautions to follow when handling fuel.
Provides guidelines for safely transporting and storing the chainsaw and fuel.
Outlines procedures for preparing the chainsaw for extended storage.
General overview of the starting and stopping procedures for the chainsaw.
Step-by-step instructions for starting the chainsaw with a cold engine.
Step-by-step instructions for starting the chainsaw with a warm engine.
Explains how to safely stop the chainsaw engine.
Lists essential checks to perform before operating the chainsaw.
Provides fundamental safety rules and advice for using the chainsaw.
Outlines fundamental safety principles for chainsaw operation.
Provides further general guidelines for safe chainsaw usage and handling.
Explains how to prevent kickback, a dangerous chainsaw reaction.
Details the fundamental techniques for safe and effective cutting with the chainsaw.
Defines key terms used in chainsaw operation and techniques.
Lists crucial factors to check before performing any cut.
Guides on assessing and managing kickback risks.
Addresses how terrain and conditions impact safe operation.
Provides techniques for safely removing branches from a felled tree.
Offers advice on cutting logs safely, avoiding kickback and jamming.
Introduces the technique for felling trees, emphasizing experience needed.
Specifies the safe distance to maintain from falling trees.
Explains factors influencing felling direction and safe preparation.
Details preparing the area and planning a safe retreat path during felling.
Describes the three-cut method for controlled tree felling.
Explains how to make directional cuts for controlling tree fall.
Explains the role of the felling hinge in controlling tree fall direction.
Details how to perform the final felling cut for controlled tree fall.
Provides guidance on safely dealing with trees that have fallen incorrectly.
Offers advice on safely releasing a tree that is caught or trapped.
Explains techniques for safely cutting wood under tension to avoid injury.
Provides detailed instructions and warnings on preventing kickback.
Defines kickback and explains how it occurs.
Refers back to basic cutting techniques for processing logs.
Provides specific safety and technique advice for removing branches.
States that only specified maintenance should be performed by the user.
Explains the function and adjustment of the carburettor for optimal performance.
Guides on inspecting and maintaining all safety features of the chainsaw.
Details how to test the automatic chain brake activation.
Explains how to check the manual activation of the chain brake trigger.
Guides on checking the proper function of the throttle lockout.
Instructions for checking the chain catcher for damage and secure attachment.
Instructions for checking the right hand guard for damage.
Guides on checking the vibration damping units for damage.
Provides guidance on checking the muffler for damage and cleaning the spark arrestor mesh.
Warns about recoil spring tension and care during replacement.
Step-by-step instructions for replacing the starter cord.
Explains how to properly tension the recoil spring when fitting.
Details procedures for replacing recoil and drive springs.
Explains how to clean and replace the air filter to prevent malfunctions.
Discusses spark plug maintenance, cleaning, and replacement for optimal engine performance.
Explains how to lubricate the bar tip sprocket for proper chain lubrication.
Details the process of lubricating the needle bearing in the clutch drum.
Explains the cooling system and the importance of keeping it clean.
Describes the centrifugal cleaning system and its maintenance.
Provides guidance on operating the chainsaw in cold weather conditions.
A comprehensive schedule of daily, weekly, and monthly maintenance tasks.
Lists key specifications for the chainsaw models including engine, dimensions, and emissions.
Details approved bar and chain combinations for the chainsaw.
Illustrates saw chain filing techniques and the use of file gauges.
Specifies that the declaration is relevant only for European markets.
To Next Page
General