E n g l i s h --- 3
545186860 Rev. 2 4/30/09
CONTENTS
Contents
KEY TO SYMBOLS
Symbols 2.........................
CONTENTS
Contents 3........................
Note the following before starting 3....
WHA T IS WHAT?
What is what? 4...................
GENERAL SAFETY PRECAUTIONS
Important 5........................
Personal protective equipment 5......
Machine’s safety equipment 6........
Cutting equipment 7.................
ASSEMBLY
Fitting the loop handle 8.............
Fitting the trimmer guard and
trimmer head 8.....................
FUEL HANDLING
Fuel safety 9.......................
Fuel 9............................
Fuelling 10.........................
STARTING AND STOPPING
Check before starting 11..............
Starting and stopping 11..............
WORKING TECHNIQUES
General working instructions 13........
MAINTENANCE
Carburetor 15.......................
Muffler 15..........................
Spark plug 16.......................
Air filter 16..........................
Maintenance schedule 17.............
TECHNICAL DATA
Technical data 18....................
EC--declaration of conformity
(Applies to Europe only) 19............
Note the following before
starting:
Jonsered has a policy of continuous prod-
uct development and therefore
reserves the right to modify the design and
appearance of products without prior
notice. Long--term exposure to noise can
result in permanent hearing impairment.
Always use approved hearing protection.
WARNING: A clearing saw,
brushcutter or trimmer can be
dangerous if used incorrectly or
carelessly , and can cause serious
or fatal injury to the operator or
others. It is extremely important
that you read and understand the
contents of this operator’s manual.
WARNING: Under no circum-
stances may the design of the
machine be modified without the
permission of the manufacturer.
Always use genuine accessories.
Non--authorized modifications
and/or accessories can result
in serious personal injury or the
death of the operator or others.
To Next Page
Loading...
Need help?
General
