Jonsered J621ES - Drive Assembly Parts Breakdown; Drive Assembly Components List

23
NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm
IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts.
Failure to do so could be hazardous, damage your snow thrower and void your warranty.
REPAIR PARTS SNOW THROWER - - MODEL NUMBER J621ES (96182001400)
DRIVE ASSEMBLY
KEY PART
NO. NO. DESCRIPTION
1 580 85 53-01 IDLER ARM
2 532 16 60-43 IDLER PULLEY
3 532 43 48-59 RETURN SPRING
4 817 06 06-20 SCREW 3/8-16 X 1-1/4 (TORQUE 13-18 FT-LBS)
5 817 06 06-20 SCREW 3/8-16 X 1-1/4 (TORQUE 22-27 FT-LBS)
6 532 19 90-92 SPACER
7 532 44 30-18 CLUTCH CABLE ASM
8 532 14 50-06 PUSH CLIP
9 532 43 45-02 BELT KEEPER
10 532 43 53-83 DRIVE PULLEY
11 532 43 72-61 BELT
12 532 43 48-60 ENGINE CRANK SPACER
13 532 42 64-90 ENGINE PULLEY
14 532 85 10-74 WASHER
15 532 43 08-17 SCREW 3/8-24 X 1/25
10
11
1
2
3
4
5
6
7
9
8
12
13
14
15
06.01.001-B