OPERATING
72 – English
Starting and stopping
Before starting
• Keep people and animals well away from the working
area.
• Perform daily maintenance. See instructions in the
section "Maintenance".
• Ensure the ignition lead sits correctly on the spark
plug.
Starting
Manual Start (LM 2146CMD, LM 2147CM, LM
2147CMD)
ModelLM 2146CMD has manual choke (primer
diaphragm). If the lawn mower is being started for the first
time press on the fuel pump five times. After that you
should press on the fuel pump three times when starting
a cold engine.
• The engine brake handle must be held against the
handlebar when the engine is started.
• Position yourself behind the machine.
• Grip the starter handle, slowly pull out the cord with
your right hand until you feel some resistance (the
starter pawls grip). Pull with force to start the engine.
Never twist the starter cord around your hand.
Electric Start (LM 2147CMDAE)
LM 2147CMDAE is equipped with electric start. Press
and hold down the electronic start until the engine starts.
The engine brake handle must be held against the
handlebar when the engine is started.
Drive
• Push the propulsion bar in towards the handle in order
to start the drive.
• Before pulling the machine towards you, disengage
the drive and push the machine forward approx. 10
cm.
Stopping
• Stop the engine by releasing the engine brake handle.
!
WARNING! Please read the operator’s
manual carefully and make sure you
understand the instructions before using
the machine.
Wear personal protective equipment. See
instructions under the ”Personal
protective equipment” heading.
To Next Page
Loading...
