43
REPAIR PARTS
TRACTOR - MODEL NO. LT2119A (JNA19H48B), PRODUCT NO. 954 13 00-71
MOWER DECK
1 532 18 03-58 Deck Weldment Mower 48
3 532 13 80-17 Bracket Asm., Sway Bar
5 532 12 46-70 Retainer Spring
6 532 17 80-24 Sway Bar Deck
8 532 17 43-65 Bolt, 7/16 Asm. Blade
(The following blades are available)
11 532 17 39-21 Blade, 48" Mulching (For Mulching
Mowers Only)
- - 532 18 00-54 Blade, 48" Hi-Lift (For bagging and
discharging)
13 532 17 43-60 Shaft Asm. greaseable
14 532 17 43-58 Housing Mandrel 48"
15 532 11 04-85 Bearing, Ball, Mandrel
16 532 17 44-93 Stripper, Mower
17 872 11 06-10 Bolt Rdhd Sq Neck 3/8-16 x 1.25
18 872 14 05-05 Bolt, Carriage 5/16-18 x 5/8
19 532 13 28-27 Bolt, Hex Head, Shoulder 5/16-18
20 532 17 43-78 Baffl e, Vortex Mower
21 873 68 05-00 Nut, Crownlock 5/16-18 Unc
24 532 10 53-04 Cap, Sleeve
25 532 17 81-02 Spring, Torsion
26 532 11 04-52 Nut, Push
27 532 18 17-07 Shield, Defl ector Mower
28 819 11 10-16 Washer 11/32 x 5/8 x 16 Ga.
29 532 13 14-91 Rod, Hinge
30 532 17 39-84 Screw, Thdroll, Washer Head
31 532 12 99-63 Washer, Spacer Mower Vented
32 532 17 78-65 Pulley, Mandrel
33 532 17 83-42 Nut, Flg. Top Lock Cntr. 9/16
36 819 13 13-16 Washer 13/32 x 13/16 x 16 Ga.
37 532 17 79-68 Pulley, Idler, Flat
39 532 17 43-75 Pulley, Idler, Driven
42 532 16 57-23 Spacer, Retainer
43 532 17 43-73 Arm, Idler Secondary
45 532 18 08-06 Cover, Mandrel Deck
46 532 13 77-29 Screw, Thdroll. 1/4-20 x 5/8
47 532 18 08-08 V-Belt, Mower, Secondary
48 532 17 43-68 V-Belt, Mower, Primary
49 873 68 06-00 Nut, Crownlock 3/8-16 Unc
50 872 11 06-12 Bolt, Carriage 3/8-16 x 1-1/2 Gr. 5
52 532 17 58-20 Pulley Idler Flat 46 Pri. Drive
54 874 78 06-16 Bolt Fin Hex 3/8-16 x 1
55 872 14 06-08 Bolt Rdhd Sqnk 3/8-16 x 1
56 532 15 59-86 Bar Pnt Adjusting Wheel Gauge
57 532 15 69-41 Pin Head Rivet
72 819 13 13-12 Washer 13/32 x 13/16 x 12
90 874 76 05-16 Bolt Hex 5/16-18 x 1
91 532 18 05-35 Bracket, Asm Noseroller, RH 48
92 873 80 06-00 Nut Lock Hex w/Ins 3/8-16
94 532 17 60-66 Roller, Nose 48"
95 532 18 05-34 Bracket, Asm Noseroller LH 48
97 532 17 85-15 Washer Hardened
98 532 17 94-79 Spring Primary Drive
99 532 18 40-58 Pulley Idler "V"
100 872 11 06-16 Bolt RDHD Sqnk 3/8-16 Unc x 2
110 532 17 50-16 Arm Spring Secondary
112 532 17 43-87 Link Tension Relief Lever
113 872 11 05-06 Bolt 5/16-18 x 3/4
114 532 17 43-84 Tension Asm Relief Lever
115 532 17 46-09 Arm Spring Tension Relief
116 532 18 42-19 Bolt, Shoulder
117 532 17 48-73 Gauge Wheel
118 873 93 06-00 Nut, Centerlock 3/8-16 Unc
119 819 12 14-14 Washer 3/8 x 7/8 x 14 Ga.
121 532 17 43-71 Spring Secondary Drive
122 532 17 46-06 Bushing Pivot Tension Relief
126 532 17 43-72 Arm, Idler, Primary Deck
130 817 00 06-16 Screw 3/8-16 x 1.0
180 873 80 05-00 Nut Lock w/Ins. 5/16-18
182 532 17 91-27 Rod Roller Nose
183 532 16 35-52 Retainer Spring
184 532 17 39-79 Keeper Belt Idler
- - 532 18 15-79 Replacement Mower, Complete
- - 532 17 43-56 Mandrel Assembly Service (In-
cludes Key Nos. 13-15)
KEY PART
NO. NO. DESCRIPTION
KEY PART
NO. NO. DESCRIPTION
NOTE: All component dimensions given in U.S. inche
1 inch = 25.4 mm
To Next Page
Loading...
