EasyManua.ls Logo

Jonsered LT2213 - User Manual

Jonsered LT2213
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Instruction manual
Please read these instructions care ful ly and
make sure you understand them before using
this machine.
Anleitungshandbuch
Bitte lesen Sie diese Anleitungen sorgfältig du-
rch und vergewissern Sie sich, daß Sie diese
verstehen, bevor Sie die Maschine in Betrieb
nehmen.
Manuel d’instructions
Merci de lire trés attentivement le manuel
d'instructions. Assurez-vous d'avoir tout com-
pris avant d'utiliser ce tracteur.
Manual de las instrucciones
Por favor lea cuidadosamente y comprenda
estas intrucciones antes de usar esta maqui-
na.
Manuale di istruzioni
Prima di utilizzare la macchina leggete queste
istruzioni con attenzione ed accertatevi di
averle comprese bene.
Instructieboekje
Lees deze instructies aandachtig en zorg dat u
ze begrijpt voordat u deze ma chine gebruikt.
532 43 19-74
LT2213
Question and Answer IconNeed help?

Do you have a question about the Jonsered LT2213 and is the answer not in the manual?

Jonsered LT2213 Specifications

General IconGeneral
BrandJonsered
ModelLT2213
CategoryLawn Mower
LanguageEnglish

Summary

Instruction manual

1. Safety Rules

I. TRAINING

Read and understand instructions and controls before operating the machine.

II. PREPARATION

Inspect and prepare the tractor and area before use, including safety checks and refueling.

III. OPERATION

Guidelines for safe operation, including slope limits, speed control, and safe driving practices.

IV. MAINTENANCE AND STORAGE

2. Assembly.

STEERING WHEEL

Instructions for mounting the steering wheel and related components.

INSTALL SEAT

ADJUST SEAT

INSTALL BATTERY

3. Functional description.

Positioning of controls

Overview of control locations and functions on the tractor.

4. Before starting.

Filling up

Instructions for safely refueling the tractor engine.

Oil level

Tire air pressure

5. Driving.

Starting of motor

Steps to start the tractor engine safely.

Warm motor

Driving

5. Reverse Operation System (ROS)

CHECK OPERATOR PRESENCE SYSTEM

Verifying the function of the operator presence safety system.

CHECK REVERSE OPERATION SYSTEM (ROS)

Verifying the function of the reverse operation safety system.

5. Cutting tips

Cutting tips

Advice for optimal cutting results and lawn care.

Driving on Slopes Safety

Ignition Key Safety Warning

6. Maintenance, adjustment.

Engine hood

Instructions for opening, removing, and reinstalling the engine hood.

Maintenance

Cleaning

TO CHANGE OIL

6. Operator Presence System and Reverse Operation System (ROS)

CHECK OPERATOR PRESENCE SYSTEM

Verifying the function of the operator presence safety system.

CHECK REVERSE OPERATION SYSTEM (ROS)

Verifying the function of the reverse operation safety system.

6. Blades

Blades

Information on blade condition, sharpening, and replacement.

BLADE REMOVAL

Procedure for safely removing mower blades.

6. To Check Brake

To Check Brake

How to check the tractor's brake system for proper function.

6. Assembly of the cutting unit

Assembly of the cutting unit

Instructions for mounting the cutting unit onto the tractor.

6. Deck Adjustment

To Level Mower

General instructions for leveling the mower deck.

VISUAL SIDE-TO-SIDE ADJUSTMENT

Procedure for visual adjustment of mower deck side-to-side level.

FRONT-TO-BACK ADJUSTMENT

6. TRANSAXLE GEAR SHIFT LEVER NEUTRAL ADJUSTMENT

TRANSAXLE GEAR SHIFT LEVER NEUTRAL ADJUSTMENT

Procedure for adjusting the gear shift lever to the neutral position.

6. Replacement of drive belt

Replacement of drive belt

Steps for removing and installing the mower drive belt.

DECK WASHOUT PORT

7. Troubleshooting.

Engine will not start

Common causes and solutions when the engine fails to start.

Start motor will not turn engine

Troubleshooting steps when the starter motor does not engage.

Engine runs unevenly

Diagnosing and fixing issues causing uneven engine operation.

Engine feels weak

Identifying causes for reduced engine power.

Engine overheats

Troubleshooting steps for an overheating engine.

Battery does not charge

Diagnosing and resolving battery charging issues.

Lighting does not function

Troubleshooting steps for non-functional lights.

The machine vibrates

Identifying causes of abnormal machine vibration.

Uneven cutting results

Diagnosing and fixing issues causing uneven lawn cutting.

8. Storage.

Service

Information required for ordering spare parts and warranty service.

Related product manuals