To Next PageTo Next Page
Need help?Do you have a question about the Jonsered yardpro YP51-450S and is the answer not in the manual?
General| Cutting Width | 51 cm |
|---|---|
| Engine Manufacturer | Briggs & Stratton |
| Weight | 32 kg |
| Wheels | 200 mm |
| Starter System | Recoil |
Read instructions, be familiar with controls and proper use.
Wear proper footwear, inspect area, handle fuel safely.
Mow safely, be aware of slopes, stop engine when needed.
Explains common symbols found on the machine and literature.
Details dangers like hot surfaces, thrown objects, and keeping hands/feet away.
Pull up handle in arrow direction and tighten wing-nuts.
Loosen T-knob, pull rope slowly, tighten T-knob.
Setting the cutting height by adjusting wheel positions for different grass lengths.
Fill engine with SAE30 oil, check level with dipstick.
Place mower on flat surface, use primer, pull starter, release brake yoke to stop.
Do not use on slopes steeper than 15° to avoid engine lubrication problems.
Mow twice weekly during growth, don't cut more than 1/3 of grass length.
Remove spark plug lead, check screws, nuts, and oil level.
Stop engine, unscrew dipstick, check level between FULL and ADD.
Grind and balance cutter blade, tighten screw properly.
Change oil after each season or 25 hours; fill with new oil.
Remove cover, wash foam element, dry, lightly oil, and reinstall.
Remove spark plug lead and empty petrol tank before transport.
