To lower your Solo or Mini, push up on the lever on
the height-adjusting pulley while supporting the
device with your opposite hand, as shown in Figure E.
Be sure to adequately support the device while
raising and lowering it with the height-adjusting
system.
STEP 5
Plug the power cord into the male power socket
located on the back of the device and plug the other
end into a wall outlet. Next, turn the pairing switch
to “Neutral mode” and turn the power switch on, as
shown in Figure F.
STEP 6
Lead Mode
Neutral
Follow Mode
FIG. F
SETTING UP YOUR JOOVV SOLO OR MINI
4.4
To Next Page
Loading...
