Locate two power cords and plug the female ends
into #2 Solo and Mini #4, plug the opposite end into
a wall outlet, as shown in Figure E. Then, turn on the
power switches on all devices and your Max will
automatically pair.
STEP 7
Follow devices will show “No” on the display until
successfully paired with a lead device. Once paired,
the display will flash “Yes” then will change to “:”.
#1 Lead Mode #2 Follow Mode
#3 Follow Mode #4 Follow Mode
FIG. D
#1 Lead Mode
#4 Follow Mode#3 Follow Mode
FIG. E
Optional Mounting Systems
(2 people required)
6.13
To Next Page
Loading...
