Locate two power cords and plug the female ends
into Solos #3 and #6, plug the opposite ends into a
wall outlet, as shown in Figure E. Then, turn on the
power switches on all devices and your Elite will
automatically pair.
Follow devices will show “No” on the display until
successfully paired with a lead device. Once paired,
the display will change to ":".
#1 Lead Mode #2 Follow Mode #3 Follow Mode
#5 Follow Mode #6 Follow Mode#4 Follow Mode
FIG. E
Optional Mounting Systems
(2 people required)
SETTING UP YOUR JOOVV ELITE
8.5
To Next Page
Loading...
