To Next PageTo Next Page
Need help?Do you have a question about the Joovy Toy Car Seat and is the answer not in the manual?
General| Weight | 2.5 pounds |
|---|---|
| Recommended Age | 2 years and up |
| Type | Toy Car Seat |
| Color | Black |
| Harness | 5-point harness |
| Material | Plastic |
Carefully remove car seat from the box and plastic bag. Discard all packaging materials properly.
Remove the doll carrier from the base by pressing the release button while lifting. Attach by aligning and pushing down.
Pull outward on handle sections, rotate, and release to lock in carrier or sitter/feeder positions.
Ensure shoulder straps are even with or just below the doll's shoulders. Adjust by re-routing straps.
Unbuckle harness, place doll with straps over shoulders, and buckle harness clip securely.
Position the handle UP and carry the carrier by the center of the handle.
Instructions for safely installing the toy car seat in a vehicle.
Thread seat belt through base, buckle, and tighten. Ensure carrier clicks securely into the base.
Details on acceptable vehicle belt systems for securing the car seat.
Steps to connect lap and shoulder belts with a locking clip and verify tightness.
Lists vehicle belt systems that should NOT be used to secure the car seat.
Instructions for installing the car seat using LATCH connectors and straps.
Periodic inspection of locking mechanism, plastic parts, and safety harness for security and damage.
Guidance on cleaning the seat pad, harness straps, and plastic parts.
