Jorc TEC-44 User Manual

7
BATTERY BACKUP
The TEC-44 is equipped with a Power Failure Protection Safeguard. The battery back-up is intended to finish a rotation cycle
in case of a power failure. The Power Failure Protection Safeguard consists of 4 AA size, 1.5V (penlight) batteries.
1. To (re)place the batteries, open the housing
by unscrewing the 4 housing screws.
2. Place the 4 batteries and close the housing by replacing the 4
housing screws.
Rely as little as possible on the power failure protection safeguard. Solve
the power supply problem as soon as possible!

Jorc TEC-44 Specifications

General

Brand	Jorc
Model	TEC-44
Category	Control Unit
Language	English