JOSAM AM34 A User Manual

Manual
JOSAM laser AM
Measuring system
®
©
ALIGNMENT OF
WHEELS AND AXLES

JOSAM AM34 A Specifications

General

Brand	JOSAM
Model	AM34 A
Category	Measuring Instruments
Language	English

Summary

Introduction

Pre-Measurement Checks for Wheel Alignment

Lists essential checks before performing wheel and axle measurements.

Measuring Equipment

JOSAM Frame Gauges and Measuring Scales

Details frame gauges, hangers, extensions, sight pins, and measuring scales.

JOSAM Adapters and Measurement Tools

Covers adapters, wheel adapters, laser projector, and alignment gauges.

Preparations Before Measuring

Frame Gauge Setup and Checking Procedure

Instructions on mounting and checking frame gauges for accurate alignment.

Wheel Adapter and Laser Projector Setup

Details attaching wheel adapters and compensating for wheel run-out.

Measurement of Rigid Axles

Rigid Axle Toe-in/Toe-out Measurement

Measures and calculates toe-in/toe-out for rear axles C5/C6.

Rear Axle Out of Square Calculation

Calculates the out of square measurement for rear axles.

Rigid Axle Camber Measurement

Details the procedure for measuring axle camber on rigid axles.

Measurement of Front Axles

Front Axle Angle Definitions

Defines toe-in/toe-out, camber, caster, KPI, and TOOT.

Front Axle Toe-in/Toe-out and Out of Square

Measures toe-in/toe-out and out of square for front axles.

Front Axle Camber, Caster, and KPI Measurement

Details measuring camber, caster, and KPI on front axles.

Front Axle Turn Measurements

Measures toe-out on turn and maximum steering angle of front wheels.