7 Operation
7.1 Function lamp
The LubeTronic 5Point is equipped with an LED function lamp (see
information in sections 5.1 "List of LubeTronic 5Point components"
and 6.3.1 "Daimler/standard wiring diagram (4-pin connector)" of
this manual). This function lamp indicates the status of the Lube-
Tronic 5Point.
The following states are displayed:
A The function lamp lights up for 3 seconds after “ignition on”.
Internal system check of LubeTronic 5Point.
B The function lamp does not light up during “normal opera-
tion”.
C The function lamp lights up continuously. The grease supply
has run out and must be replenished.
D If the function lamp is flashing, there is a malfunction or dam-
age to the LubeTronic 5Point.
7.2 Switching on the system
The LubeTronic 5Point is activated by the vehicle ignition. After
this, the LubeTronic 5Point automatically dispenses grease at fixed
intervals (based on the selected lubrication rate, see section 6.3
"Connecting the LubeTronic 5Point".
7.3 Special lubrication
To activate special lubrication, the special lubrication feature must
be connected as described in section 6.3.5 "Connecting the Lube-
Tronic 5Point for special lubrication (optional)".
When you press the button for 3 seconds, grease will automatically
be dispensed 5 separate times over a period of approx. 20 minutes.
16 MUB 002 009 M01 (REV-B) 07-2020 LubeTronic 5Point
To Next Page
Loading...
Need help?
General