Why jost Modul В 01 01 Lifting Systems landing gear cannot be retracted, or only with difficulty?
If the Jost Lifting Systems landing gear cannot be retracted easily, it might be due to a few reasons. The connection shaft could be too long, in which case you should shorten it. Alternatively, the landing gear or inside tube might be bent, or the spindle or gear could be defective. In these cases, repair of the landing gear is necessary.
What to do if jost Modul В 01 01 Lifting Systems landing gear can only be lowered until it touches the ground?
If the Jost Lifting Systems landing gear stops lowering once it touches the ground, the issue is likely that the incorrect gear is engaged. Make sure to engage low gear before contact with the ground.
Why jost Lifting Systems gear cannot be changed?
If you are unable to change gears on your Jost Lifting Systems, the gear may be defective, requiring you to repair the landing gear.
General| Brand | jost |
|---|---|
| Model | Modul В 01 01 |
| Category | Lifting Systems |
| Language | English |
To Next Page