Need help?Do you have a question about the jotron RA-7203 and is the answer not in the manual?
Identifies all front panel controls, indicators, and the display.
Details the purpose and pin assignments of the front RJ45 connector.
Lists relevant industry standards like ICAO and EN.
Covers operating temperature, humidity, shock, and vibration requirements.
Specifies frequency ranges, data ports (RS232, RS485), and protocols.
Details power requirements and reliability metrics (MTBF, MTTR).
Provides metrics for sensitivity, adjacent channel rejection, and intermodulation.
Details IF bandwidth, image response, and squelch control mechanisms.
Covers AGC range, attach/decay times, harmonic distortion, and crossmodulation.
Specifies blocking performance and dynamic range capabilities.
Defines different user roles and their permissions for menu access.
Instructions on using buttons (FbA, FbB, RS, FbC) to navigate menus.
Outlines the main menu categories like Radio Control, RX Config, Interface Config.
Describes how to adjust volume, squelch, frequency, and brightness via the operator menu.
Lists and identifies all physical connectors on the rear panel.
Details the purpose and pin assignments of the LAN interface connector.
Details the purpose and pin assignments of the Aux 1 connector.
Details the purpose and pin assignments of the Aux 2 connector.
Details the purpose and pin assignments of the REM connector.
Shows wiring connections between RJ45 and KRONE interfaces for AUX and REM.
To Next Page
General