Jøtul 12 Firelight User Manual

Crucial safety warnings for proper installation to prevent fires.

Guidelines for selecting and installing the stove pipe.

Procedures for safely passing the chimney connector through walls.

Types of approved chimneys for wood burning stoves.

Specifications and clearances for double wall connectors.

Requirements for constructing and installing masonry chimneys.

Installation guidelines for factory-built metal chimneys.

How to connect the stove to a masonry chimney thimble.

Manufacturer's instructions for connecting to prefabricated chimneys.

Requirements for non-combustible floor protection around the stove.

Diagrams showing required clearances to surrounding combustible materials.

Recommendations for proper wood storage for efficient burning.

Explanation of creosote formation and chimney cleaning.

Procedure for the initial break-in fires for new stoves.

Overview of the stove's control mechanisms.

Operation of the hands-free top load door foot pedal.

How to operate the stove's bypass damper.

Instructions for unlatching and opening the front doors.

How to operate the ash door latch for ash removal.

Adjusting the air control for heat output.

Step-by-step guide on how to build an efficient fire.

Fine-tuning the stove's heat output using the air control.

Procedure for safely and efficiently reloading the stove with wood.

How to safely remove ashes from the stove.

Using the stove as a fireplace with open doors.

Introduction to the catalytic combustor and its function.

How to monitor the catalyst's performance and health.

Identifying and resolving common catalyst problems.

Specific issues like plugging, masking, cracking, and deactivation.

Information about the warranty for the catalytic combustor.

Routine annual maintenance checks for the stove.

How to check and replace the bypass damper gasket.

Procedure for replacing cracked or broken stove glass.

How to clean the stove's glass panels.

Assembly instructions for optional warming shelves.