What to do if Jovyatlas JOVYTEC PME 3000 VA shows output overload?
If the Jovyatlas UPS experiences an output overload, reduce the connected load. The UPS will then revert to normal operation automatically.
What to do if Jovyatlas UPS is running a battery test?
If the Jovyatlas UPS is performing a battery test, no action is required. Wait for the battery test to complete.
Provides essential details on the use, care, and charging of VRLA batteries for optimal performance and lifespan.
Lists the various alarm tones and their meanings during battery discharging, depletion, or faults.
Details the various input and output sockets, interfaces, and protection features on the UPS units.
Diagram and description of electrical connections for the 1000VA and 1500VA JOVYTEC PE models.
Illustrates and describes the front panel layout for both JOVYTEC PE and PME series.
Details how to review various UPS parameters like voltage, frequency, load, and temperature via the display.
Guides users through configuring various UPS settings like output voltage, tolerance, and alarm behavior.
Provides safety precautions and guidelines for authorized personnel when replacing the battery.
Lists common display messages, alarm tones, descriptions, and recommended remedies for faults.
Presents detailed technical specifications for the UPS units, including power, voltage, frequency, and efficiency.
Provides detailed technical specifications for the JOVYTEC PE battery cases, including dimensions and weights.
Provides detailed technical specifications for the JOVYTEC PME battery cases, including dimensions, weights, and environmental requirements.
General| Category | UPS |
|---|---|
| VA Rating | 3000 VA |
| Capacity | 2400 W |
| Frequency | 50/60 Hz |
| Battery Type | Sealed Lead Acid |
| Waveform | Pure Sinewave |
| Operating Temperature | 0-40°C |
| Input Voltage | 230 VAC |
| Output Voltage | 230 VAC |
| Backup Time | Depending on load |
| Communication Interface | USB, RS232 |
| Protection Features | Overload, Short Circuit |
To Next Page