Need help?Do you have a question about the Joy TWISTAIR TA-020 and is the answer not in the manual?
General| Type | Portable Air Compressor |
|---|---|
| Model | TWISTAIR TA-020 |
| Power Source | Electric |
| Power | 1.5 HP |
| Max Pressure | 8 bar |
| Tank Capacity | 20 L |
Lists required forces for initial tensioning and normal operation based on horsepower.
Explains the method for aligning compressor and motor sheaves using a straight edge.
Details tasks like cleaning fins, servicing air cleaner, and testing temperature switch.
Includes changing oil, filter, separator element, and inspecting strainers.
Advises on motor lubrication requirements, especially after periods of inactivity.
Provides instructions on how to properly clean the air filter element.
Details the steps for removing and installing a new oil-air separator element.
Explains how to identify and order replacement parts using the index and illustrations.
Details the components and structure of the model number for identification.
Describes an optional oil bath air filter for dusty environments, including part numbers.
Details pressure regulators for air and non-corrosive gases, specifying pressures and part numbers.
Describes an air line filter with an automatic drain for delivering dry, clean air.
Explains an air line filter with a manual drain for condensate removal.
Describes a pipeline lubricator for delivering lubricated air in specific applications.
Details aftercoolers that reduce condensate and are required with dryers.
Describes a solenoid valve that controls water supply based on compressor operation.
Explains a kit that automatically collects and removes moisture and condensate.
Describes optional oversize tanks for increased air demand and reduced starts/stops.
Lists kits for modifying units to a pedestal configuration in specific regions.
Details kits for code conversion for tank-mounted units in specific regions.
Specifies a low differential pressure switch with its range and part number.
Lists a vertical air receiver tank with its capacity and dimensions.
Provides part numbers for fully enclosed belt guards for 20 and 25 HP units.
Describes a tool used for checking and determining V-belt tension.
Details an accessory that removes condensate from air before it enters the receiver.
Lists relay kits for N.E.M.A. starters, specifying types and part numbers.
Lists kits for control voltage transformers for different operating voltages.
Mentions bearing maintenance and compressor overhaul kits, referencing other pages for details.
To Next Page
