Joyfect MULTI ONE - Loading Medium Pods and Initial Setup

31
USING THE DEVICE
• Commissioning WITH Medium Pod: Unscrew the lid of the pod and loosely fill your choice blend into
the pod� Tap down with the filling tool� Do not overfill the pod� Screw the lid back onto the pod� Insert
the pod into the ceramic heating chamber�
Do not switch the Multi One on while loading the pod�
• Screw the lid back onto the device�
• Connect the mouthpiece to the device�
• Connect the smart connector to the Multi One� (detailed description follows)
• Power on the Multi One� (detailed description follows)