Joyfect MULTI ONE - Powering the Device On and Off; Device Power Management Procedures

35
USING THE DEVICE
Power ON/OFF
• Connect the Dry Herb Nail or the Waxy eNail to the device, as already described above�
• Turn on the Rear Power Safety Switch at the back�
• Rapidly press the power button five times within 2 seconds to power your Multi One ON or OFF� When
powered ON, the display will indicate “SYSTEM ON”� When powered OFF, the display will indicate
“SYSTEM OFF”�
• The Smart Control System of the device will automatically detect if the Waxy eNail or the Dry Herb
Nail is connected and begins with heating up to the last used temperature setting�