Press touch screen to adjust the temperature inside the car refrigerator
Car Refrigerator Operation
Temperature Adjustment Settings
1.Press {On/Off} key for 3 seconds to turn on/standby the refrigerator.
2. Touch the {+ or -} key to adjust the temperature.
3. Press the {+ or -} key for a long time. The preset temperature is linearly adjusted with a speed of
2°C. During the adjustment, the number does not flicker.
4. Within 3 seconds after the operation panel has not detected any key operation, the temperature
display will stop flashing, exit the temperature setting, and save the currently set temperature.
5. Temperature shows the measured temp. Of refrigerator temp. Sensor.
6. In the standby mode, only the {ON/OFF} button is on, and the temperature display and button
light are off.
7. In working status, press {SET} key to perform MAX/ECO switching.
8, Temperature adjustment function: can be adjusted between -22 °C ~ +10 °C.
9, Temperature conversion: Press {set} and {+} 3 seconds at the same time Celsius (°C) \ Fahrenheit
(°F) temperature switch
10, Power protection mode: high, medium, low three levels to protect the car battery. We suggest to
set high level of the fridge when connect with car battery. To set medium and low level when with
other battery.
11, Note: please adjust the refrigerator parameters while unlocking. If the refrigerator is locked,
press “set” up for 3 seconds to unlock it.
The car refrigerator has a power-off memory function, and the working state (power on/off state and working mode)
before the power off is automatically restored after the next power on, and there is no need to set it again.
ECO: Energy Saving and Cooling Mode MAX: Strong Cooling Mode
Operation Method:
07
To Next Page
Loading...
Need help?
General