JP Hobby ER-120 V1 - User Manual

New Multifunctional JP-Electric Retract controller V1 and V2
Instruction Manual
For JP Hobby Alloy Electric Retracts Landing Gear ER-005 / ER-010 / ER-120 / ER-150 / ER-200
A- Multi-function landing gear controller features:
1. Automatic identification current
2. Set the voltage of the door servo
3. Set the CW and CCW direction and stroke of the door servo
4. Set the door retraction sequence
Long press the mode button to enter the setting mode:
1. When the A or B light is flashing, press the + / - button to set the servo CW and CCW direction
function.
2. When A+B flashes alternately or C+D flashes alternately, press + / - button to set the stroke of the
servo.
3. When the C lamp is flashing, it is V1 mode.
4. When the D lamp flashes, it is V2 mode.
JP HOBBY is distributed in Europe by WEB EFFECT / TURBINES RC

Summary

Multi-function Landing Gear Controller Features

Automatic Identification Current

Automatically identifies current for landing gear control.

Door Servo Voltage Setting

Allows setting the voltage for the door servo.

Door Servo Direction and Stroke

Configures CW/CCW direction and stroke of the door servo.

Door Retraction Sequence

Defines the sequence for door retraction and extension.

Setting Mode Operations

Enter setting mode to adjust servo direction, stroke, and view V1/V2 modes.

Electric Retract Control Operating Principle

Normal Service Condition Operation

Describes retract system activation for opening and closing in normal service.

Retracts Installation, Operation, and Maintenance

Installation Guide

Details the simple installation process for electric retracts.

Operation Guidelines

Emphasizes using JP Retract Control units and benefits of electric retracts.

Retracts Troubleshooting

Troubleshooting Guide

Provides solutions for common retract issues like movement, door operation, and direction.

JP Hobby ER-120 V1 Specifications

General

Brand	JP Hobby
Model	ER-120 V1
Category	Controller
Language	English