5
Index
HANDBOOK
DPS KIT
Digital Positioner System
Digital positioner for our J4C
models. Instrumentation signal
4-20 mA, 0-20 mA, 0-10 V or
1-10 V.
This DPS digital positioner is
suitable for S and B models.
INTERFACE KIT
Interface System
Using the Interface KIT cable we
communicate with the actuator,
read parameters and change the
actuators conguration.
BLUETOOTH
We have introduced the Bluetooth
communication system in
our actuators, in order to
communicate with our actuators,
from any Android devices. This
system appears in our catalogue
as a factory option. From our
mobile phone or tablet we could
order our actuator to open/close
or stop.
MODBUS
Modbus System
• Plug and play
• Each device could be operated
manually.
• Could be seen from the control
panel PC.
• Fast and exible, starting by 3
actuators up to 255.
• Up to 1.200 m distance range.
OPTIONS
KIT CONCEPT
Option assembled in Factory
Option Self-Assembling
BSR KIT
Battery System Returns
BSR system for our J4C models.
It is an emergency fail safe
kit system by battery wich is
common to S and B models.
The BSR system for our models
140 Nm and 300 Nm it is the
same but with a bigger capacity
battery.
The installation of the kit could be done at the factory or, if you prefer, do it by yourself. You could nd the Instruction
Manual in our web site.
With this kit we make it easier for customers who have a Basic actuator to convert it into a more complete actuator.
Our distributors could have lower stock and quicker service.
LOWER STOCK FAST SERVICE
To Next Page
Loading...
Need help?
General
