What to do if my JR Home Indoor Fireplace doesn't work?
If your JR Home Indoor Fireplace isn't working, it may be due to overheating inner components or a tripped home circuit breaker. Try resetting the switch by turning the master switch off, waiting for 5 minutes, and then turning it back on.
Why does my JR Home Indoor Fireplace appliance turn off and will not turn on?
If your JR Home Indoor Fireplace turns off and won't turn back on, it could be due to overheating, causing the safety device to disconnect the thermal switch, or a tripped house circuit breaker. To resolve this, unplug the appliance and allow it to cool for 15 minutes, then plug it back in. Also, reset the house circuit breaker.
What to do if JR Home Indoor Fireplace heater does not provide heat when turned on?
If your JR Home Indoor Fireplace heater isn't providing heat, the thermal switch or circuit breaker may have tripped. Turn the unit off and unplug it for 5 minutes, then plug it back in and turn it on. Also, turn off the circuit breaker that supplies electricity to the unit, wait 5 minutes, and then flip the circuit breaker back on.
What to do if the remote control for my JR Home Indoor Fireplace does not work?
If the remote control for your JR Home Indoor Fireplace isn't working, it might have a low battery or the master switch could be in the “OFF” position. Try changing the battery in the remote control and check to ensure the master switch is turned on.
Advises caution regarding fumes affecting small pets during initial use.
Guidance on choosing a suitable location for the fireplace installation.
Steps to take before proceeding with the fireplace installation.
Instructions for installing the fireplace within a wall structure.
Overview of the appliance's control panel buttons and their functions.
Details on the physical location of the master switch and control panel.
How to use the master switch to control the appliance's power supply.
Instructions for turning the fireplace power on and off.
Adjusting the flame effect intensity across five levels.
Information on the two heat settings (700W and 1350W) and fan operation.
Setting the automatic shut-off timer from 1 to 9 hours.
The default display shows the current room temperature in Celsius.
Using the remote control for all functions, including battery installation.
Addresses issues like fireplace not working, flame movement, and remote control problems.
Guidance for when the circuit breaker trips or the fuse blows.
Information on the temperature limiting control and how to reset it.
Details on product warranty, coverage, exclusions, and limitations.
How to contact customer service for questions, parts, or warranty issues.
Instructions on how to register the product for warranty service online or by mail.
General| Model | BLT-999W-13 |
|---|---|
| Category | Indoor Fireplace |
| Fuel Type | Electric |
| Power Source | Electric |
| Voltage | 120V |
| Flame Effect | Yes |
| Adjustable Thermostat | Yes |
| Remote Control | Yes |
| Overheat Protection | Yes |
| Material | Metal, Glass |
| Color | Black |
| Wattage | 1500W |
| Heating Area | 400 sq ft |
| Heating Capacity | 400 square feet |
To Next Page