Need help?Do you have a question about the JR ProPo X-378 and is the answer not in the manual?
Details the transmitter and receiver features.
Provides detailed specifications for system, transmitter, servo, and receiver components.
Instructions for charging transmitter and receiver batteries, including notes and warnings.
Covers control identification, channel assignment, and transmitter setup.
Covers installation requirements and system connections.
Navigating Normal Display, Model Selection, Type Selection, and Data Reset.
Detailed explanation of various functions and their settings.
Provides practical examples of mixing options.
Identifies controls, explains connections, and basic setup for helicopters.
Navigating and utilizing various system modes for helicopters.
Detailed explanation of helicopter functions and settings.
Identifies controls, explains connections, and basic setup for sailplanes.
Navigating and utilizing various system modes for sailplanes.
Detailed explanation of sailplane functions and settings.
Outlines procedures for glider setup and programming.
Precautions for servos and general safety/operation notes.
FAA safety standards and essential daily pre-flight checks.
Lists frequencies and details warranty coverage and repair service.
General| Type | Transmitter |
|---|---|
| Channels | 8 |
| Display | LCD |
| Battery | 9.6V NiCd |
| Frequency | 72MHz |
| Modulation | PPM |
| Model Type | Airplane, Helicopter |
To Next Page