Need help?Do you have a question about the JR ProPo xg8 and is the answer not in the manual?
A brief welcome message and encouragement to read the manual.
Overview of the transmitter's capabilities and multi-functional aspects.
Essential safety guidelines, warnings, and handling instructions for safe operation.
Guidelines for safe battery usage, charging, and recycling procedures.
Instructions for applying model type stickers and adjusting stick head length.
Procedures for SD card mounting/removal and handling rechargeable Ni-MH batteries.
Identification and labeling of transmitter components for different aircraft types.
Methods for mounting batteries and charging the transmitter battery safely.
Adjusting the spring tension of the transmitter control sticks for optimal feel.
Connecting servos and receivers, and understanding 2.4GHz band characteristics.
Explains the functions of the transmitter's input keys and dial for operation.
The main display screen shown after powering on the transmitter.
Customizing and accessing frequently used functions for quick access.
Guide for automatically displayed basic setting screens when creating new models.
Switching between aircraft settings using switches for different flight conditions.
Adjusting control surface angles and curves for varied aircraft response.
Adjusting servo travel angles for each channel's control surface independently.
Fine-tuning servo horn alignment to achieve a 90-degree linkage angle.
Reversing the operating direction of servos on each channel.
Adjusting servo operation in response to throttle/pitch stick, using up to 5-point curves.
Controlling gyro sensitivity using GEAR and AUX channels for tail lock or dual gain.
Creating, switching, and registering up to 30 different aircraft models.
Copying and erasing model data between transmitter, SD card, or other transmitters.
Changing the model type (Helicopter, Airplane, Glider) and resetting data.
Guiding slave stick operation using another transmitter via a trainer cable.
Setting optional servo positions for out-of-control situations or lost radio waves.
Displays and causes for common software error messages and their responses.
Information on warranty, repair procedures, and contacting customer service.
General| Channels | 8 |
|---|---|
| Modulation | DMSS |
| Frequency | 2.4GHz |
| Telemetry | Yes |
| Model Memory | 30 |
| RF Power | 100mW |
| Display | LCD |
To Next Page
