Need help?Do you have a question about the JR Racing XS3PRO and is the answer not in the manual?
Selects the transmitter's operating frequency channel.
Matches the receiver's frequency channel to the transmitter.
Reverses the direction of servo movement for steering, throttle, or aux.
Adjusts the maximum travel limits for servos.
Sets the left and right travel limits for the steering servo.
Sets the forward and brake travel limits for the throttle servo.
Adjusts travel limits for the optional auxiliary channel.
Electronically trims the neutral position of servos.
Adjusts the steering servo's center position.
Adjusts the throttle servo's center position.
Adjusts brake trim via Grip Lever A.
Lists key features of the transmitter and receiver.
Details specifications for servos and system components.
Adjusts the back trigger position for user comfort.
Describes the removable foam grip for enhanced comfort.
Explains how to connect receiver, servos, and power sources properly.
Details the correct procedure for powering the transmitter and receiver on/off.
Illustrates the physical components and mounting of RC servos.
Explains the function of each transmitter button and display element.
Shows the standard operating screen with channel and battery voltage.
Alerts to low battery and explains the lithium battery backup.
Displays the lap timer or elapsed time.
Indicates potential ROM or battery issues.
Describes how to enter and exit the transmitter's system configuration mode.
Allows selection of one of ten stored model memories.
Selects the transmission channel using synthesized PLL technology.
Assigns a three-character name to each model memory.
Sets the transmitter's signal output frame rate (Normal/Fast).
Configures the behavior of the third auxiliary channel.
Assigns a specific function to the Grip Button C.
Resets selected model settings to factory defaults.
Copies model data from one memory to another.
Explains how to enter and navigate the transmitter's function settings.
Adjusts the overall steering servo travel percentage.
Reduces or eliminates dead zones in throttle forward/brake.
Alters steering/throttle response rate around neutral.
Fine-tunes the maximum travel for steering, throttle, and aux channels.
Allows mixing of one channel's movement to another channel.
Records individual lap times and allows review.
Electronically adjusts servo neutral position without moving trim lever.
Changes the direction of servo rotation.
Quick adjustment of trims and dual-rate using grip levers.
Electronic adjustment of the steering servo's center position.
Electronic adjustment of the throttle servo's center position.
Adjusts steering sensitivity/radius via Grip Lever B.
Adjusts brake travel via Grip Lever A.
Accesses Aux Channel 3 functions via Grip Lever A.
Details the limited warranty for the RC system.
Provides instructions for sending the system for repair.
To Next Page
General