JRC DCST User Manual

Jet Research Center Drill Collar Severing Tool P/N 101293224 Rev. K
Page 2 of 20
Jet Research Center, 8432 South I-35W, Alvarado, Texas, 76009-9775, USA
Telephone 1-817-761-2000; Toll Free 1-800-451-5403; Fax 1-817-783-5812; Website www.jetresearch.com
This Field Loading Procedure should be followed in conjunction with the
assembly and application of the following listed Jet Research Center,
Drill Collar Severing Tools:
 1-3/8 in OD (35.1 mm) – HMX
 1-3/8 in OD (35.1 mm) – HNS
 1-3/4 in OD (44.5 mm) – HMX
 1-3/4 in OD (44.5 mm) – HNS
 2 in OD (50.8 mm) – HMX
 2 in OD (50.8 mm) – HNS
 2-5/8 in OD (66.5 mm) – HMX
 2-5/8 in OD (66.5 mm) – HNS
 2-1/8in OD (54mm) High Pressure – HMX
 2-1/8in OD (54mm) High Pressure – HNS

JRC DCST Specifications

General

Brand	JRC
Model	DCST
Category	Cutter
Language	English