JRC Inmarsat FleetBroadband JUE-251 User Manual

Inmarsat FleetBroadband JUE-501/JUE-251 Quick Reference Guide
1
1. Power ON
Satellite searching
Communication available status
ON
[When Satellite Search is failed] Carry out setting again by pressing button.
(See [Satellite selection/setting] (p3) in this Reference Guide. )
[How to turn OFF the JUE-501/JUE-251] Press the power switch again.
Screen and all LED lamps are cleared, then operation is terminated.
Initializing
Initialize
APAC E143.5
14:03 UTC
SAT SEARCH
Registering to network
APAC E143.5
14:03 UTC
REGISTERING
APAC E143.5
14:03 UTC
CS PS READY
Turn on JUE-501/JUE-251 by pushing power switch of Main unit.
* Antenna bars display communication status
0 : Impossible to communicate (no reception)
1 - 2:Possible to communicate but unstable
3 - 6:
Possible to stable communicate
A LED of Main unit starts blinking.
Registering is terminated and [CS PS
READY] text is displayed.
Various services are available.
[READY] lamp lit. Refer to [3.4.1. LCD/LED section] of Instruction Manual.
Satellite searching is terminated and
then [REGISTERING] text is displayed.
Registering to Inmarsat network is
started.
[SAT SEARCH] text is displayed in the
lowest, [Status] line.
Satellite searching is started.
* Although there is nothing wrong with
JUE-501/JUE-251, selecting satellite makes
some noise on ADE.
About 90 seconds later, initializing is
started and blinking [Initialize] text is
displayed.
CODE: 7ZPSC0431

JRC Inmarsat FleetBroadband JUE-251 Specifications

General

Brand	JRC
Model	Inmarsat FleetBroadband JUE-251
Category	Conference System
Language	English

Summary

Power ON and Initialization

Initialization Process

LED blinks, then [Initialize] text displayed. Process takes about 90 seconds.

Satellite and Network Registration

Displays [SAT SEARCH] then [REGISTERING] text as satellite and network registration occurs.

Communication Availability

Shows [CS PS READY] status and antenna bars indicating communication status.

Troubleshooting Power ON

Instructions for failed satellite search and how to turn off the unit.

Making and Answering Calls

Making a Call

Steps for initiating a call, including handset use and reception confirmation.

Answering a Call

Process for receiving a call, including screen changes and handset use.

Satellite Selection and Settings

Satellite Selection Process

Guide to selecting and setting the satellite using cursor and OK button.

Handling Satellite Acquisition Failure

Explains [SEARCH NG] display and actions for failed satellite acquisition.