4-35
[FISH 3] Screen Display
・Function・ When you select the beam direction displayed on three shoal of fish screens (four
direction display).
Setting value: [ 4 ]
The beam direction in the hatching part is selected with key as [4] and it fixes with the
[ENT] k ey.
4 Direction Display
The display and the beam direction at
4 direction display are like a left chart.
4.6.2 Screen Display Setting
・Function・ I It sets concerning the display of the [FISH] screen.
Setting item: Color arrangement, background color, color sample display, color erasing,
and screen scrolling
Operation Standard Menu: [MENU] key/Menu screen/Picture setting≫ / [FISH] screen ≫/[ENT]
key/"Fish Finder Picture setting” menu
Selection Frame Menu: [□] key/ Enclose “[FISH] display screen” with the frame /[MENU]
key/"Fish Finder display” menu
Color
・Function・ The color expressed on the screen according to the signal strength arrangement of color
(color sample) is switched.
Setting value: [ A B C D ]
The color sample can be selected according to four kinds (A-D). Refer to Table 4.6.1.
The color sample is displayed in the left end of the FISH screen. It makes to non-display
by the setting. (*1)
Table 4.6.1 Color Sample and Color arrangement
Weak Signal Strength Strong
No １ ２ ３ ４ ５ ６ ７ ８ ９ １０ １１ １２ １３ １４ １５
Ａ Dark
Blue
Blue Light
Blue
Dark
Sky
Blue
Sky
Blue
Grn Light
Grn
Pea
Grn
Yellow Light
Org
Org Dark
Org
Red Brwn Dark
Brwn
Ｂ Dark
Blue
Blue Dark
Grn
Grn Light
Grn
Pea
Grn
Yellow Light
Org
Org Dark
Org
Red Dark
Red
Light
Brwn
Brwn Dark
Brwn
Ｃ Light
Sky
Blue
Sky
Blue
Light
Blue
Blue Dark
Blue
Pea
Grn
Yellow Light
Org
Org Dark
Org
Red Light
Brwn
Brwn Dark
Brwn
Pink
Ｄ Back
-ground
Sky Blue Blue Pea Grn Yellow Org Red Brwn
Operation Standard Menu: "Fish Finder Picture setting” menu/Color: C
Selection Frame Menu: "Fish Finder display” menu/Color: C
Back Color
・Function・ The background color when a no signal and no drawing is chosen.
Setting item: [ Standard Black Dark- Blue Gray White ]
The screen background color pairs with the background color in the graph in the standard,
and the background color in the graph is decided by the background color of the screen,
too. The background color of the screen is set by Brightness (*2) of the menu.
Operation Standard Menu: "Fish Finder Picture setting” menu/Back color: Black
Selection Frame Menu: "Fish Finder display” menu/Back color: Black
*1 Refer to "Color sample" in this menu for the setting of Display/Non-display of the color sample.
*2 As for the background color of the screen, the selection change can be done by menu/Brightness/High and Low. Moreover, the
color corresponding to High and Low is selected from four colors (Black, Dark- Blue, Gray, and White) by the submenu setting.
Fore Port Fore Starboard
/ FP / FS
After Port After Starboard
/ AP / AS
▲
▼
To Next Page
Loading...