7-12
3) The memory data of the track etc. copied onto the USB external memory is written
to new SSD(Software Ver.).
①The USB external memory to which the memory data is copied by 2) leaves insertion in
USB2, and replaces SSD. (*1)". (*2)
②[Memory data copy and erase: ≫] is selected from main menu/”Initial setting” menu,
and the following submenu is displayed with the [ENT] key.
③[Load data: Operate] is selected from submenu "Memory data copy and erase", and the
[ENT] key is executed pushing.
④When the memory preservation data of the USB external memory is normally copied
onto "New SSD", the message of "File transfer is completed" is displayed on the display
screen. (*3)
4) End
①The power supply of the current meter is turned off, the USB external memory is pulled
out from USB2, and it ends.
②After ending, turn on the power supply of the current meter again, display software
version information (*4) by the menu, and confirm the version number of exchanged
SSD.
Erase: When you erase the memory data that becomes unnecessary by the transfer of
equipment etc.
①[Memory data copy and erase: ≫] is selected from main menu/”Initial setting” menu,
and the following submenu is displayed with the [ENT] key.
②[Erase data: Operate] is selected from submenu "Memory data copy and erase", and
the [ENT] key is executed pushing.
③When the memory preservation data of SSD is normally erased, the message of "File
deletion is completed" is displayed on the display screen. (*3)
④The power supply of the current meter is turned off and it ends.
*1 SSD are exchanged as an example of "New SSD" according to the upgrade of current meter software by serviceman.
*2 When the SSD card is pulled out and inserted, turn off the power supply of the current meter.
*3 Confirm an abnormal situation on 9.2.1 Self Test screen when it is displayed even if it executes it again, "Failed in File transfer".
re Version Information”.
Memory Data Copy and Erase
File Transfer is Completed
Save Data
Erase Data
／
Cancel／Operate
／
Memory Data Copy and Erase
File Deletion is Completed
Save Data
Erase Data
／
Cancel／Operate
／
To Next Page
Loading...