JRC JLN-650 - Page 174

12-4
Standard Menu
（７）
INSTALLATION SETTING
NMEA0183 INPUT SETTING
･1.HEDING SENSOR DISCON. GPS COMPASS GYRO OTHERS
･2.SPEED/COURSE SENSOR DISCON. GPS GPS COMPASS OTHERS
･3.WATER TEMP. SENSOR DISCON. CONNECT
･4.WIND ANEMOMETER DISCON. CONNECT
･DEPTH UNIT m FM
･WIND VELOCITY UNIT m/s kn
･TIDAL CURRENT DIRECTION TIDE IS FLOWING TIDE IS COMING
･TD ANGL CORRECTION ±0.0 ° :SELECT WITH / KEY
･S.SPEED CORRECTION ±0.0 % :SELECT WITH / KEY
･DRAFT CORRECTION ±0.0 m :SELECT WITH / KEY
･DELAYL CORRECTION ±0.0 s :SELECT WITH / KEY
･LETTER SIZE NORMAL WIDE
･MENU SCREEN TRANSPARENCY 0 1 2 3
･GPS TIME DELAY 7
･TIDE DATA UPDATE TIME STANDARD FAST MOMENT
･S.SPEED DATA UPDATE TIME STANDARD FAST
･HYPERAMPLITUDE EXCLUSION CANCEL OPERATE
･LAN OUTPUT CANCEL OPERATE
･ALARM DISP ON OFF
･WARNING DISP ON OFF
･SELF TEST ≫
･MASTER RESET/
USER MENU SETTING
≫
･MENU DISPLAY DISPLAY EXIT PREVIOUS
･HELP ≫ PUSH ENT KEY
（８）
MASTER RESET / USER MENU SETTING
USER MENU SETTING
･1.READ OUT THE SETTING VALUE CANCEL FACTORY USER1 USER2 EXT.
･2.WRITE IN THE SETING VALUE CANCEL OPERATE ≫
･TOTAL DISTANCE RUN RESET CANCEL OPERATE ≫
･MASTER RESET CANCEL OPERATE ≫
･MENU DISPLAY DISPLAY EXIT PREVIOUS
･HELP ≫ PUSH ENT KEY
（９）
WRITE IN THE SETTING VALUE
･WRITE IN THE VALUE OF MENU
DISPLAYED
CANCEL USER1 USER2
･MENU DISPLAY DISPLAY EXIT PREVIOUS
･HELP ≫ PUSH ENT KEY
MENU / INITIAL SETTING ≫ INSTALLATION
SETTING
≫
MASTER RESET / USER MENU
SETTING
Refer to 7.1.10 “Integrating Distance/Master Reset/User
Menu Registration”.
MENU / INITIAL SETTING ≫ INSTALLATION
SETTING
≫
MASTER RESET / USER MENU
SETTING
≫
WRITE IN THE SETTING VALUE
Refer to 4.8 “User Menu Registration”.
MENU / INITIAL SETTING ≫ INSTALLATION
SETTING
Refer to 7.1 “Setting When Installing”.
▲ ▼
▲ ▼
▲ ▼
▲ ▼