3－54
JMA-9100 Instruction Manual > 3.BASIC OPERATION > 3.6 DISPLAY USER MAP
The user map move mode is selected.
is displayed in the cursor mode located at the upper right of the display.
3) Put the cursor on a mark or line, and left-click.
When a mark or line to be moved is selected, the cursor mark will appear.
4) Move the cursor mark to the destination, and left-click.
The selected mark or line is moved to the destination.
To move another mark or line, repeat procedures 3 and 4.
5) When finished with the correction of all items, left-click the
button.
The cursor mode changes to the normal operation mode, terminating the user map move
mode.
(Example)
Move Map
0.Exit
To Next Page
Loading...
