8 – 9
(5) Check with Performance Monitor
The transmitted power and the receiving sensitivity can be checked relatively using the
Performance Monitor. For the operating procedures of the Performance Monitor, refer to
“Operation of Performance Monitor” in Section 3.4 BASIC OPERATIONS.
(6) Error Logging Display
If any system error occurs, the communication line in which the error is caused will be
indicated by the selected characters. The errors that are released will also be indicated in
time sequence.
1 Press .
The TEST Menu will appear.
2 Press .
The ERROR LOGGING Menu will appear and the location in which an error has occurred will
appear by selected characters.
To Next Page
Loading...
