JRC JMA-9923-7XA User Manual

aaaaaaaaaaooaaaaaaaaaaaoaaaaaaooaaaaaoa
)
at
the upper right
of the
radar
Move
the
cross cursor to a target
(being
tracked)
to indicate
its
data using
the
trackball. Next,
press
the left
trackball button
to select
it.
(Up
to two targets can
be selected.)
The
data
of
the designated target will
be displayed,
and the
symbol will change
to
The target
data will remain
on the
radar display until
the target is lost
and its
vector
disappears,
or until another target is
designated.
lf a target with
the
"
i--;
"
symbol is designated,
only its true
bearing
(BRG)
and
range
(RNG)
will appear until its vector
appears.
Method
of
Displaying
Target Data
ITGT
DATA]
@
1
Press@
f$fi'P
Xwitt
appear
in
the CURSOR
(
screen.
Cancellation
of Displaying
Target Data
ITGT
DATAI
'
:
' ' ' '
E@
1
Press
@
?,illi!A?#willappear
in the CURSoR
(
screen.
)at
the
upper right of the
radar
Move
the cross
cursor to a target
(being
target)
to indicate
its
data using
the
trackball.
Next,
press
the right
trackball button
to select it.
The data of the
designated target will be deleted,
and
the symbol will, change
to
acouisition mark.
5-19

JRC JMA-9923-7XA Specifications

General

Brand	JRC
Model	JMA-9923-7XA
Category	Marine Radar
Language	English