JRC JMA-9923-7XA User Manual

aaaoaaaaoeaoaaoaaaaaoaaaaaaoaaaaaoaaaaa
Gheck that
the ship's mains are
turned
on.
r-n
2 Press
ll(""*.lll.
":"
Orange
lamp on
-+
The warm-up
time will appear.
Wait for completion of
warm-up
When
the
warm-up time expires, the warm-up
iime
screen disappears and
tne
8$tttffi:
display on the upper-left
corner of the radar
display
is
cha
nsed
to .&ile$lDlFtrt.
-fr
Press
FEY/
.
The radar
transmission
and
the
scanner
start rotating.
The
,,ttffilffi
on the upper-left
corner
on the
radar
display is
changed
to.td4i{$ll!it::.
The warm-up
time will appear.
-fl
3 A
push
of
thetsT6'i/ 5 seconds or
more
vanishes
the display
of
warm-up time.
The radar transmission
and the scanner
start rotating.
The
f$ilf;itlWli
l
on the upper-left corner
on the radar display is
changed
tof;iffi$l$n;ltr].
Note:
ln
the
moment sag
of a
power
supply, and
the case of an unusual
operation outbreak,
it can transmit, immediately
after rebooting
the
power
supply.
Please do not use
emergent
transmitting
operation except
the above,
The life of a
magnetron will be shortened
if
the
warm-up
is not
completed.
Attention:
Even if
@
is
pressed
uefore
r:$f.*trtDBlf?,.l
is disptayed,
radar
transmission
is not
performed.
The
method of transmission
in case of emerqencv.
1 Gheck
that
the
ship's mains
are
turned on.
Press
Orange lamp on
-->
3-3

JRC JMA-9923-7XA Specifications

General

Brand	JRC
Model	JMA-9923-7XA
Category	Marine Radar
Language	English