Need help?Do you have a question about the JRT JHD-1000 Series and is the answer not in the manual?
Describes the function of each key on the LCD for navigation and parameter adjustment.
Explains how to access and navigate through the various menus available on the LCD interface.
Shows real-time elevator status data, including floor, speed, and system information.
Allows reading and writing PLC registers for elevator configuration.
Enables disabling detections for easier car installation and inspection work.
Instructions for physically connecting the programming console to the PLC.
Step-by-step process for accessing and changing elevator configuration data (DM registers).
Lists terminals requiring jumpers for initial system setup.
Correctly setting the pump motor overload relay according to motor specifications.
Critical checks and input/relay statuses required before initiating car movement.
Procedures for operating the elevator in inspection mode for testing and adjustments.
How group controllers function with a dispatcher for managing multiple elevators.
Setting up the call dispatch logic and parameters via the operator screen.
Configuring the system to manage traffic flow during peak and off-peak hours.
Installing and adjusting the standard selector tape system with magnets and sensors.
Procedures for installing and configuring the perforated tape system, including magnet placement.
Setting the number of counts for correct slowdown activation before reaching a floor.
How to change controller parameters using the built-in LCD interface.
Detailed explanation of registers controlling various aspects of door operation.
Configuration for restricting floor access using card readers or key management.
Setting up home parking preferences for group or simplex elevators.
How to view, interpret, and clear system alarms and faults.
Steps for replacing the PLC's internal battery to maintain program integrity.
Troubleshooting guides for common soft-starter faults and diagnostic indicators.
Comprehensive explanations of specific alarms, their causes, and verification methods.
General| Brand | JRT |
|---|---|
| Model | JHD-1000 Series |
| Category | Controller |
| Language | English |
To Next Page