Jscale CJ-600 - Key Pad Functions; Scale Features and Usage; Power Up Segment Test; Overload Indicator

FEATUR E. _ -:-:-_ --: ::-- _
, Power Up Segment Test
VVhe nfirsttuming theuniton, all segments ofthed isplay will appear ass hown
below.This display will rema inforapp roximately 2 secon ds and then resetto o.
1:8:8:8:8
, Overload
VVh en ana pplied load excee dsthe 600g capacity . "EEEE"willappearon
the display. Remove the excess iveload immediate lyI
IRemember: You can permanently damage the'scale by overloading it!
" Negative Value
Any tarred value ora valu e left in memory willbe displayed asa nega tive numbe r
once all weight is remov ed from theunit Press tareto re-Ze rothe unit.
' Auto off
An auto shutofff eatu reis provided to conserve battery power. Theunit will
automat icallytumoffafter appro ximately 2 minutes of inactivity.
KE Y PAD FUNCTIONS
, Mode
Mode selection : Press and releas e thekey once to cha ngeweight unit
You can select g (grams), Ib(pounds):oz ( ounces) , dwt (pe nnyweight) or pes
(partscounting).
, ON IOFF
Pressthis keyto turn unit on. Once theunit is on, pressand hold the same
keyto turn thescaleoff
, PCS (Count) Sample sizes can be 10,20, 50 or 100
The following stepsoutlinethe p roced ureforcumulativewei ghing of samples:
Switchthescale on Use the Mode key to put thescale into PCSmode. Now
pressthePCS keyonce'. The display will show "S=10". Put 10 pcsof
sampl es onthe platform. Pres s the Mode key(tolock inthewe ight) . The
displaywillshow"10" andthescale is ready for count ing. 'NOTE: You can
choosethe quantity of s amples as 20pcs , 50pcs or 100pcs by press ingthe
PCSkey multipletimes (instead of once). For20pc count ing, thed isplay will
show "S=20". Put20pcs samp lesonthe pl atform , then pressthe Mode key. The
displaywill show "20"andthe scale is ready forcounting. The same instructions
canbe applied to 50pcs count ingand 100p escounting