• 'liT
Press 'liT to reset the scale to zero . This can be used for eliminating from a
sample (or a Tray/Container) the weight value oi a container weight is
permanenUyremoved for the remainder of the procedure.. Just turn the scale
ON, place the tray or container on weig hing platform. and press the
ZfTkey.
The scale will show 0.0 (or 0.00) on the display and you can add items to the
container/tray .
NOTE:
lMle
n all weight are removed from the weighing tray. the tared value of
a container will be displayed as a negative number. . Cycle the power on the
scale to.reset the scale to zero.
• COVER /
BOW
L
The CJ comes with a cover that also acts as a unique pouring bowl. Please
keep
your CJ covered at all times when not in use to protect from damage
• AC
ADAP
TOR
The CJ can
be operated on AC power with a standard 4.5volt AC adaptor.
Please only use the correct AC adaptor for this scale
- an incorrect power
AC adaptor can cause damage to the scale and possible fire or injury.
·Weighmeter TM:
On the side of the display you will notice a series of bars that increase as the
load on the scale increases. This is our Weighmeter TM invention. It helps you
know the remaining capacity on the scale and also will indicate an overlo ad if
one occurs. Please use the Weighmeter TM to monitor your weig hing loads
and please do not overload this scale.
(%.C
E)
To Previous Page
Loading...