Juguetronica MICRODRONE AUTOFLIGHT User Manual

Age: 8+
INSTRUCTION MANUAL
AUTOFLIGHT
MICRODRONE
Warning:
1. This quadcopter is suitable for indoor and outdoor flying, even in moderate wind
conditions.
2. It uses the 2.4 GHz frequency which offers a long range signal and permits several devices
to fly within the same area without interference. Additionally, pilots can control forward/
backwards flying, left/right turns, and left/right flying.
3. Please, read this manual carefully before using your Microdrone Autoflight and keep it
for future reference.

Juguetronica MICRODRONE AUTOFLIGHT Specifications

General

Brand	Juguetronica
Model	MICRODRONE AUTOFLIGHT
Category	Drones
Control	Remote Control
Flight Time	6 minutes
Charging Time	30 minutes
Battery Capacity	150 mAh
Remote Control Frequency	2.4 GHz
Remote Control Range	30 meters
Battery	Lithium Polymer (LiPo)
Age Recommendation	14+ years
Features	360º flips

Summary

General Safety Warnings

Transmitter Controls and Features

Transmitter Battery Installation

Installing Transmitter Batteries

Step-by-step guide for inserting AAA batteries into the transmitter.

Drone Charging Procedure

Charging the Drone Battery

Instructions for connecting the drone to a USB charger.

Lithium Battery Charging Safety

General Charging Precautions

Safety guidelines for charging lithium batteries to prevent hazards.

Charging Temperature and Monitoring

Specifies safe charging temperature and the need for supervision.

Lithium Battery Usage and Handling Safety

Prohibited Battery Actions

Lists actions to avoid, like throwing batteries into fire or using damaged ones.

Drone and Transmitter Binding Process

Binding Steps

Step-by-step instructions to pair the drone with the transmitter.

Flight Mode Operations

Automatic Take-off and Landing

How to use the automatic take-off and landing feature.

Manual Take-off and Landing

Emergency Stop Function

Flight Control Operations

Altitude Control (Rise/Descend)

Rotation Control

Forward/Backward Movement

Lateral Movement Control

Trimming Operations

Trimming Procedure for Stability