INSTALLATION AND OPERATING INSTRUCTIONS | WWW.JUICE-PRO.COM.AU 7
TROUBLE SHOOTING
BEFORE YOU CALL FOR SERVICE PLEASE REVIEW THE TROUBLE SHOOTING TIPS FIRST.
Problem Possible Causes What To Do
No power to juicer.
Juicer not plugged in. Check the juicer is plugged in.
Incorrect assembly. Reassemble the juicer according to the instructions.
Motor has stopped.
Bowl has been overfilled with material.
Press the reverse power button to try and clear the clog.
May need to be try this a few times.
Overuse has caused the motor to shut
down as a precaution to overheating.
Switch off and let the motor cool before using again.
Leaking from beneath the
bowl.
Rubber plug on base of bowl not correctly
inserted.
Rubber plug on base of bowl not correctly inserted.
A small amount of residual juice is normal.
It is normal to find a small amount of juice, clean from
the appliance with damp cloth.
Stain on the bowl, strainer,
spinning brush.
Natural colour from juicing materials.
This is perfectly normal. To reduce discolouration
ensure you rinse and clean the appliance immediately
after use.
Squeaking noise during
operation.
Juicing noise from squeezing screw.
This is perfectly normal. Ensure you do not overload
the juicer.
Damage to the strainer.
Frozen foods, ice, pips, seeds, unknown
substance or too much material in the bowl.
Ensure you read the instructions carefully on the correct
use of the juicer. Do not overfill the juicer.
Spare parts available, visit www.juice-pro.com.au
To Next Page
Loading...