How to fix JuicePro ALI-VJP-W2 Juicer when it has no power?
If your JuicePro Juicer has no power, first, ensure that it is properly plugged into a working power outlet. If it still doesn't power on, check if the juicer is assembled correctly according to the provided instructions. Incorrect assembly can prevent the juicer from starting.
Why did my JuicePro ALI-VJP-W2 Juicer motor stop?
If the motor of your JuicePro Juicer stops during operation: * It may be due to the bowl being overfilled. In this case, press the reverse power button to try and clear any blockage, repeating this process if necessary. * Alternatively, overuse might have triggered a safety shutdown to prevent overheating. If this is the case, switch off the juicer and allow the motor to cool down completely before resuming use.
Why is my JuicePro ALI-VJP-W2 Juicer leaking from the bottom?
If your JuicePro Juicer is leaking from beneath the bowl, it may be due to the rubber plug on the base of the bowl not being correctly inserted. Make sure it is properly in place. Note that a small amount of residual juice is normal, and you can clean it with a damp cloth.
Lists all juicer parts for verification against the package contents.
Step-by-step guide to correctly assemble the juicer components before use.
Procedures for using the juicer, including controls and important notes.
Steps to resolve issues when the juicer becomes clogged or stops working.
Instructions on how to take apart and clean the juicer parts after use.
Guidance on preparing ingredients and feeding them for optimal juicing results.
Suggestions for creative juice combinations and flavour experiments.
Specific techniques for effectively juicing leafy vegetables.
Instructions for preparing plant-based milks using the juicer.
Details the coverage, exclusions, and conditions for product warranty.
To Next Page
General