Thank you for choosing this sliding gate opener. Please read the manual carefully before assembling and
using it. Do not leave out the manual if you send this product to a third party. This product complies with the
recognized technical standards and safety regulations. Our company has the right to change this manual
without prior notice.
1.General safety
Warning:
Incorrect or improper use of this product can cause damage to persons, animals or
properties.
• Please ensure that the input voltage used matches with the supply voltage of gate opener
(AC220V±10% 50Hz).
• All modifications to wiring or electrics, and any adjustment or maintenance to 240VAC MUST be
done by a qualified electrician.
• To avoid damaging gas, power or other underground utility lines, contact the relevant authority
BEFORE digging.
• All potential hazards and exposed pinch points of the gate must be eliminated or guarded prior to
installation of this gate motor.
• Never mount any device that operates the gate motor where the user can reach over, under,
around or through the gate to operate the controls. These must be placed at least 1.8m from any
moving part of the moving gate.
• Ensure power plug is disconnected from the power socket during installation or maintenance.
• Keep remote control and other control devices out of children’s reach, in order to avoid
unintentional activation.
• Never allow anyone to hang onto the gate while moving.
• Please ensure a warning sign provided is fitted to the structure.
• To ensure safety, before installing the main motor, make sure Gate End Stop and a Gate Stopper
mounted at each end of the rail to prevent the gate travelling off the track.
• If required, install infrared photocells ( sold separately) to detect obstructions and prevent injury or
damage.
• Instruct all users about the control systems provided and the manual opening operation in case of
emergency.
• Do not install the product in an explosive atmosphere or where there is any danger of flooding.
• This product was exclusively designed and manufactured for the use specified in the present
documentation. Any other use not specified in this documentation could damage the product and be
dangerous.
• Only use original parts for any maintenance or repair operation. We decline all responsibility with
respect to the automation safety and correct operation when other supplier’s components are used.
• The user must avoid any attempt to carry out any works or repairs on the motor, and should always
request the assistance of qualified personnel.
• This motor is suitable for use on one sliding gate only.
• Anything which is not expressly provided for in these instructions is not allowed and will void
warranty.
• Dispose of all packing materials (plastic, cardboard, polystyrene etc.) according to current
guidelines.
• Keep plastic bags and polystyrene out of children’s reach.
Please save these instructions for future use.
To Next Page
Loading...